About Permanent Metal Roofing Systems
A Dallas-Area Metal Roofing Company Built on In-House Fabrication
Permanent Metal Roofing Systems is a metal roofing company serving Dallas and the wider Metroplex that makes the roof system it installs. We roll-form our own panels, bend our own trim and flashing, and our crews put it all on the roof.
- 20+ years of experience
- Lifetime limited warranty
- Free written estimates
Who Is Permanent Metal Roofing Systems?
We are a metal roof manufacturer and installer. Many roofing contractors buy panels from a supply house and send the sheet metal out to another shop. PMRS forms its own panels and bends its own trim, so one company answers for the whole system.
Our team brings 20+ years of combined experience forming and installing metal roofs. That experience covers houses of every size, apartment buildings and commercial projects, and it shapes what we offer today:
- Residential and commercial metal roof installation
- Fabrication of panels, trim, flashing, coping, chimney caps and custom parts
- Estimating and take-offs from plans or field measurements
- Shop drawings and project engineering, with site-specific engineering on request
- Gutters, including stainless Yankee gutters and custom box gutters
- Materials supply for roofing contractors and builders
See the full list on our metal roofing services page.
Where Did PMRS Get Its Start?
PMRS began in New Jersey and built its business fabricating and installing metal roofing across the Northeast. The company grew by doing both halves of the job, making the parts and putting them on the building.
That work reached well beyond houses. The kinds of commercial buildings we worked on included hotels, schools, shopping malls, hospitals, airports and military bases. Commercial jobs like those call for shop drawings, engineering and weather-tightness warranties, and all three became part of what we offer.
The product line grew the same way. Today it runs from snap lock and mechanical lock standing seam to copper and zinc panels, flat lock and diamond panels for turrets and mansards, and Tedlar film finishes. Two past PMRS jobs show the range:
- A low-slope residence roofed in 1.5-inch mechanical lock, double-locked for uplift. About 10,000 square feet of .032 aluminum in three PVDF colors covered roofs, walls and soffits, including roof panels 100 feet long.
- A steep-slope retail building in 1.5-inch snap lock, formed from .032 aluminum with a matte black Tedlar finish and finished with custom box gutters.
Why Is PMRS in Mesquite, Texas?
Dallas-Fort Worth needs exactly what metal roofing does best. Texas has led the nation in major hail events for 11 straight years, and DFW summers average about 20 days at 100 F or hotter. Asphalt shingles struggle under both, while a well-built metal roof typically lasts 40 to 70 years here.
Our Dallas-Fort Worth office at 3100 Manchester Dr in Mesquite puts our estimators and crews in east Dallas County. From there, Garland, Rowlett, Forney, Rockwall and Dallas are a short drive, and the northern suburbs are within easy reach. Learn more on the Mesquite office page or browse our service areas.
How Does PMRS Build a Roof?
We control each step, from the first measurement to the last piece of trim. Small jobs and large ones follow the same five stages.
- Consultation. We meet you, inspect the existing roof and learn what the building needs.
- Measurement. We work from your plans, or we measure the structure by hand to get exact quantities.
- Quotation. You receive a written quote for the entire system, with the warranties attached.
- Fabrication. We roll-form the panels, bend the trim on computerized equipment and deliver the system to the site.
- Installation. Our crews install to the manufacturer’s recommendations and standard practice.
Forming to the length of each run means fewer laps and joints on the roof. Bending trim by machine means every hem and angle repeats, which helps a roof resist the crazing, cracking and oil canning that come from forcing parts to fit. See the details in our process and the installation process.
What Does PMRS Stand For?
Five habits guide how we work with every customer, from a single homeowner to a general contractor.
Control the whole system
Panels, trim, flashing and installation come from one company. When something needs attention, there is no one else to blame.
Publish real prices
Our installed prices are posted on the metal roof cost page, with a calculator you can use before you ever call.
Explain the details
Gauge, seam type, clip spacing and underlayment decide how a roof performs. We walk you through each one in plain English.
Put warranties in writing
Our standing seam roofs carry a lifetime non-prorated limited warranty on material and labor. Read the terms on our warranties page.
Play it straight on insurance
We document storm damage honestly and never offer to waive a deductible, which Texas law prohibits.
What Do Homeowners and Builders Get From PMRS?
Homeowners get a finished roof and one point of contact. Builders, architects and contractors get a fabrication partner that can also install.
For homeowners
- A free estimate based on an on-site inspection
- A written quote covering the whole roof system
- Standing seam, metal shingles or stone-coated steel
- Color guidance for HOAs, brick and Texas sun
Start with residential metal roofing.
For builders, architects and contractors
- Spec sheets, submittals and take-offs
- Shop drawings and project engineering
- Panels, trim and accessories supplied to your crew
- Weather-tightness warranties on mechanically seamed systems
Start with commercial metal roofing or the downloads library.
Which PMRS Projects Can I Look At?
Our project archive names the panel, the metal and the finish on each job, so you can compare real choices before you pick your own.
Recent Metal Roofing Projects
White Standing Seam on a Ranch Home
A bright white standing seam roof on a single-story ranch with a hip roof and attached garage.
Steep Standing Seam Roof With a Wood Gable
A steep gray standing seam roof meeting a wood-clad gable, with crisp formed trim at the transition.
Gray Standing Seam on a Two-Story Home
An aerial view of a complex two-story roof finished in gray standing seam, with multiple hips, valleys and dormers.
Questions About Our Company
Is PMRS a manufacturer or a roofing contractor?
Both. We roll-form our own metal roof panels, bend our own trim, flashing and custom parts, and install complete roof systems for homeowners and commercial owners. We also supply panels and trim to other roofing contractors and builders.
Where is Permanent Metal Roofing Systems located?
Our Dallas-Fort Worth office is at 3100 Manchester Dr, Mesquite, TX 75150, in east Dallas County. From there we serve the Metroplex, including Dallas, Garland, Rowlett, Forney, Rockwall, Plano, Frisco and Arlington.
Where did PMRS start?
The company began in New Jersey and built its business fabricating and installing metal roofing in the Northeast. Today our office in Mesquite serves homeowners, builders and commercial owners across Dallas-Fort Worth.
Does PMRS work with builders and architects?
Yes. We provide spec sheets, submittals, estimating and take-offs, shop drawings and project engineering, with site-specific engineering available on request. Contractors can also buy panels, trim and accessories from us without an installation contract.
What warranty does PMRS offer?
PMRS standing seam roofs carry our Lifetime Non-Prorated Limited Warranty on material and labor. Mechanically seamed systems seamed to spec can qualify for weather-tightness warranties, and finishes carry separate coil-coater warranties. Our warranties page lists the terms.
Talk to the People Who Make Your Roof
Send a few details about your home or project and we will call to arrange a visit. Builders can attach plans for a take-off or materials quote.
Get Your Free Metal Roof Estimate
Tell us about your roof and a Permanent Metal Roofing Systems specialist will follow up to schedule your free estimate. No pressure, no obligation.
Prefer to talk now? Call (469) 466-2421.
See What a Manufacturer-Installed Roof Costs
Call (469) 466-2421 or book a free estimate with our Mesquite office.