Dallas County (also Collin) · Sachse, Texas
Hail-Ready Metal Roofing for Sachse Two-Storey Homes
Sachse grew up along SH-78 and the President George Bush Turnpike, and most of its homes sit in large subdivisions near Woodbridge Golf Club. Permanent Metal Roofing Systems installs stone-coated steel, metal shingle and standing seam roofs on those homes, adds metal gutters and custom flashing, and roofs shops and commercial buildings with PBR or standing seam panels. Sachse lies mostly in Dallas County, with its northern part in Collin County, about 12 miles from our Mesquite office.
- 20+ years of experience
- Lifetime limited warranty
- Free written estimates
Matching a Metal Roof to Sachse Homes
Most Sachse homes are 1990s-2020s brick-veneer two-storeys in large subdivisions along SH-78, including the Sachse side of Woodbridge and Jackson Meadows. Their roofs are typically big, steep and broken up by gables, which means more ridge, hip and valley length for hail and wind to work on. Composition roofs from the late 1990s and 2000s are now old enough to need replacement. For these homes, stone-coated steel shake or shingle is a natural fit, because it suits HOA review and its granular surface hides hail marks. The city’s small core of older ranch homes suits snap lock standing seam.
We serve the Sachse side of Woodbridge, Jackson Meadows, the Salmon Park area and Heritage Park, plus homes along SH-78 and the President George Bush Turnpike and near Woodbridge Golf Club and Lake Ray Hubbard.
Sachse Hail, Wind and Heat: What a Roof Faces
Sachse sits between the two most destructive northeast Dallas County storms of the last decade: the December 26, 2015 tornado that tracked through Garland and Rowlett, and the April 11, 2016 softball-size hailstorm that hit the Wylie zone. Softball hail will mark any roof, so the goal is a roof that stays watertight. Stone-coated steel and many metal shingles carry manufacturer UL 2218 Class 4 ratings, and their textured surface hides dents. On standing seam, choose 24-gauge over 26-gauge. Each carrier sets its own Class 4 credit. Edge and ridge clips go in at tighter spacing for wind uplift.
- Honest advice on what Class 4 does and does not cover, including cosmetic denting
- Dated storm-damage photos and measurements
- No pressure and no door-to-door storm chasing
See how Class 4 impact-rated metal roofing works, or compare standing seam systems and stone-coated steel.
Our Metal Roofing Work in Sachse, TX
In Sachse, Class 4 stone-coated steel and metal shingles matter most, because they meet HOA expectations and stand up to the hail this corridor gets. Standing seam serves the older ranch core and contemporary custom homes. Metal gutters, bent for long two-storey eaves, protect brick and foundations, and PBR covers backyard shops and commercial buildings along SH-78.
Standing Seam Metal Roofing
Concealed-fastener standing seam in 24-gauge Galvalume, aluminum, copper or zinc, with Kynar 500 finishes built for Texas sun.
Stone-Coated Steel
Steel panels coated in stone granules for the look of shake, shingle or tile, with impact ratings from the manufacturer.
Metal Shingles and Shakes
EDCO and Classic Metal Roofing Systems shingle and shake profiles in colors that suit brick and stone.
Shop, Barn and Porch Panels
Corrugated, 7.2 rib, PBR and RPBR panels for shops, barns, carports and porches around Sachse.
Custom Flashing and Chimney Caps
Valley, wall and step flashing, coping and chimney caps bent to match your roof color and profile.
Run your Sachse roof through the standing seam cost calculator in about a minute; a free on-site measurement turns it into a firm price.
Approvals Before a Sachse Metal Roof Goes On
Sachse has a heavy HOA presence in Woodbridge and most post-2000 subdivisions. Texas Property Code 202.011 generally stops an HOA from banning impact-resistant or energy-efficient roofing that resembles approved materials, although the board may still regulate color and appearance. That favors Class 4 stone-coated steel and metal shingles on most streets, while standing seam needs a fuller submittal. We gather the samples and product data, and we pull the city permit where required.
Sachse at a Glance
| Counties | Dallas County (also Collin) |
| ZIP codes we cover | 75048 |
| Residents | Roughly 33,000 |
| From our office | About 12 miles from 3100 Manchester Dr in Mesquite |
| Roof systems | Standing seam, stone-coated steel, metal shingles and shakes, corrugated and PBR panels, custom flashing, chimney caps and metal gutters |
| Estimate and warranty | Free and itemized in writing; lifetime non-prorated limited warranty on PMRS standing seam |
The PMRS Difference in Sachse
- Panels, trim and flashing fabricated in-house, so every piece matches and fits.
- Written, itemized estimates that spell out panel, gauge, finish, underlayment and trim.
- Our own installation crews, managed from our Mesquite office.
- A lifetime non-prorated limited warranty on PMRS standing seam roofs. See our warranties.
- Class 4 impact-rated systems and the product documentation insurers ask for.
Metal Roofing in Sachse: Common Questions
How exposed is Sachse to large hail?
Exposed enough to plan for it. Sachse lies between the Garland-Rowlett path of the December 26, 2015 tornado and the Wylie zone of the April 11, 2016 softball-size hailstorm, the two most destructive storms in northeast Dallas County that decade. Choosing a roof for the hail you will see, rather than hoping to avoid it, is the realistic approach here.
Which gauge should a Sachse homeowner choose for hail?
For steel standing seam, 24 gauge is a sound middle choice: it resists cosmetic dents better than 26 gauge without the added cost of 22 gauge. If dents would bother you, a textured stone-coated steel roof hides marks better than any smooth panel. Remember that UL 2218 Class 4 measures cracking and rupture, not appearance, so read your policy’s cosmetic-damage terms.
Can PMRS add metal gutters with a new Sachse roof?
Yes. We fabricate metal gutters, including custom box gutters and stainless Yankee gutters, and install them with the roof so the drip edge, flashing and gutter line up. On two-storey homes with long eaves, larger gutters and downspouts carry heavy spring rain away from the brick and slab. Gutter accessories are available as well.
Do you offer free metal roofing estimates in Sachse?
Yes, and they come in writing. A PMRS estimator measures the roof, looks at the decking and flashing, lays out panel and color choices, and itemizes the price. From our Mesquite office, Sachse is roughly 12 miles away.
More Cities Near Sachse
The full list lives on our DFW service areas page, and the office details are on our Mesquite location page.
Ready for a Permanent Roof in Sachse?
Send the form for a written Sachse estimate, or call (469) 466-2421 and talk metal roofing with the people who fabricate it.