Metal roofing installers serving Caddo Mills, Texas
Caddo Mills Metal Roofs, From Old Town to the New Subdivisions
How do you roof a town that has grown several times over since the 2020 census? In Caddo Mills the answer depends on which side of that growth your house sits. Permanent Metal Roofing Systems installs standing seam, steel shingles and DECRA stone-coated panels on the new subdivision homes and on the older houses along SH 66, and PBR or corrugated panels on the shops and barns around them. Caddo Mills is in Hunt County, about 34 miles from our Mesquite office by way of I-30, close enough that estimates and installations fit into a regular week.
- 20+ years of experience
- Lifetime limited warranty
- Free written estimates
Matching a Metal Roof to Caddo Mills Homes
Caddo Mills took its name from a gristmill built in the late 1870s and became a depot town once the Katy railroad arrived in 1886. For most of the next century it held somewhere between a few hundred and a thousand-odd residents, which is why the older core along SH 66 is small: mid-century houses whose decking deserves a close look when the old roof comes off. Nearly everything else is new. The Preserve at Brushy Creek and Fox Landing are production-built subdivisions of the 2020s under builder-grade composition roofs. A house there becomes a candidate for a metal shingle or stone-coated steel when hail or age ends the first roof, while the in-town houses suit snap lock standing seam after a full tear-off.
Our crews cover Fox Landing, The Preserve at Brushy Creek, the old town along SH 66, and acreage around the municipal airport and by the FM 36 and FM 1903 exits on I-30.
Why Caddo Mills Roofs Take a Beating
Quarter-size hail was reported on the north side of Caddo Mills on the evening of May 8, 2024, from the same line of storms that dropped golf-ball stones south of Greenville. Two years later, on April 27, 2026, Hunt County supercells put golf-ball hail down near Quinlan, a short drive to the south. Storms along this stretch of I-30 cross open Blackland Prairie, so wind counts as much as ice, and our crews tighten the clip and fastener pattern along eaves, rakes and the ridge, the places uplift works on first. For hail, EDCO and DECRA list UL 2218 Class 4 ratings for their steel shake and stone-coated products, and standing seam in 24-gauge steel shows fewer dents than thinner panels. Carriers differ on what a Class 4 roof is worth on the premium.
- Honest advice on what Class 4 does and does not cover, including cosmetic denting
- Dated storm-damage photos and measurements
- No pressure and no door-to-door storm chasing
See how Class 4 impact-rated metal roofing works, what to do about hail damage and insurance claims, or compare standing seam systems and stone-coated steel.
Roof Systems for Caddo Mills Homes and Buildings
New-construction neighborhoods drive most of the demand in Caddo Mills, which puts stone-coated steel and metal shingles first on the list: each trades a builder roof for a product its maker rates Class 4, in a profile an architectural committee recognizes. Standing seam fits the older houses near SH 66 and custom homes on larger lots. Around the municipal airport and out along FM 36 and FM 1903, shops, barns and barndominiums take PBR or corrugated panels, formed to length and trimmed in the house color.
Standing Seam Roofs
Snap lock and mechanical lock panels with concealed clips, formed in Mesquite or on site and run the full length of each Caddo Mills roof slope.
Stone-Coated Steel
A textured, low-glare metal roof that blends into established streets and passes most HOA design reviews.
Metal Shingles and Shakes
Aluminum and steel shakes and slate-look shingles for homeowners who want metal performance without a ribbed look.
Corrugated and PBR Roofs
Corrugated and PBR panels for homes, shops, barns, carports and porches around Caddo Mills.
Copper and Zinc Roofing
Natural copper and zinc in standing seam, flat lock or diamond panels for whole roofs, bays and turrets.
Metal Roof Repair
Leaks at seams, screws, pipe boots and flashing traced and fixed on Caddo Mills metal roofs, ours or not.
Every Caddo Mills roof is priced from its own measurements. The metal roof cost guide explains which choices move the number most, from pitch and tear-off to profile and metal.
Caddo Mills HOA Rules and City Permits for Metal
Caddo Mills spells out its roofing rule in a one-page handout: replacing the whole roof, decking and covering together, needs a city permit, while a shingles-only job does not. The same handout tells owners to contact their homeowners association about deed restrictions before applying, and nearly every new subdivision here has one. Those boards do not have the last word on material: Texas Property Code 202.011 says a shingle engineered against hail and wind, or one that lowers cooling load, generally cannot be banned when it resembles the approved roofs and is at least as durable, though the board keeps its say over color. We assemble the HOA package and take out the permit when the job needs one.
Caddo Mills Coverage Snapshot
| Counties | Hunt County |
| Residents | Roughly 5,700 |
| Typical home | median value $300,000; half built in 1997 or earlier (Census ACS 2020-2024) |
| From our base | About 34 miles from Mesquite |
| Roof systems | Standing seam, metal shingles and shakes, stone-coated steel, corrugated and PBR, copper and zinc |
| Services | New roofs, replacements, repairs and hail damage documentation |
| Estimate and warranty | Free, measured and itemized in writing; lifetime non-prorated limited warranty on PMRS standing seam, transferable one time |
The PMRS Difference in Caddo Mills
- Class 4 impact-rated systems and the product documentation insurers ask for.
- Your deductible stays your deductible. Texas law bars roofers from covering it, and we comply.
- HOA approval packages with product sheets and color samples.
- Metal roofing specialists since 2006, with our own crews on every job.
- Panels and trim formed by PMRS in Mesquite or on site, so every piece fits the roof it was made for.
Metal Roofing in Caddo Mills: Common Questions
Fox Landing is brand new. When would a metal roof make sense there?
Usually when the first roof has to come off anyway. Builder-grade shingles on a 2020s house have years left unless a hailstorm cuts that short. If an insurance claim is already paying to replace the roof, that is the moment to compare stone-coated steel or a metal shingle with another round of shingles, and to ask your HOA for its approved color list.
Does the City of Caddo Mills want a permit for a metal roof?
The city’s permit handout lists roof replacement, meaning decking and covering together, as work that needs a permit, and says a shingles-only job does not. Because a metal roof on an older house can involve new sheathing, we check the scope with Building Services before starting and file when it applies. The city also asks owners to clear deed restrictions with their HOA first.
Will PMRS roof a shop or barn outside the Caddo Mills city limits?
Yes. PBR and corrugated panels are made for shops, barns and barndominiums, and the mobile roll former can cut them to length on your land. Outside any city limits, Hunt County states that it does not require building inspections, so no city roofing permit applies there; a subdivision’s deed restrictions still do where they exist. Panel and trim colors can match the house.
What should Caddo Mills owners do first after a hailstorm?
Photograph the roof and any ceiling stains, then call us before signing anything. We document the damage with dated photos and measurements and write a scope for your adjuster. Your carrier decides coverage, and Texas law makes the deductible yours to pay.
Neighboring Communities on Our Route
- Royse City (5 mi)
- Greenville (10 mi)
- Fate (11 mi)
- Lavon (11 mi)
- Quinlan (11 mi)
- Rockwall (14 mi)
The full list lives on our DFW service areas page, and the office details are on our Mesquite location page.
Book Your Free Caddo Mills Roof Estimate
Our Mesquite office books estimates across Hunt County, Caddo Mills included. Call (469) 466-2421 or send the form.
