Metal roof installation in Greenville, TX
Greenville Metal Roofing for the Hunt County Seat’s Homes and Shops
Greenville was laid out as the Hunt County seat in 1846, and its roofs span nearly every decade since: frame houses near the courthouse, brick ranches from the years after Majors Field opened, and new subdivisions on the edges of town. Permanent Metal Roofing Systems puts standing seam, shake and shingle profiles in steel or aluminum, DECRA stone-coated steel, plus ribbed PBR or corrugated panels on all of them, with panels formed by PMRS and put on by our own crews. Greenville is about 46 miles from our Mesquite office, straight out I-30, so the office books estimate visits ahead and fits the measuring, color samples and questions into one trip.
- 20+ years of experience
- Lifetime limited warranty
- Free written estimates
Roof Types We See Around Greenville
Census figures put the midpoint of Greenville’s housing at 1979, meaning half the homes went up that year or earlier, and only a little over half of occupied homes are owner-occupied, so landlords make a large share of the roofing decisions here. The oldest houses stand around downtown and Lee Street, early-1900s frame homes and bungalows that can have plank decking and shallow porch roofs. Those suit snap lock standing seam on the main slopes with a mechanical lock section over the porch. The brick ranch houses built at mid-century in the older parts of town take standing seam or a steel shake equally well. In Jackson’s Run and the other production-built communities of the 2020s, a metal shingle or stone-coated steel takes the place of builder shingles without changing how the block looks.
We work throughout Greenville, from historic downtown and Lee Street to Peniel, Jackson’s Run, Stratton Place and Mallard Point, and along the I-30 corridor past Majors Field and the L3Harris campus.
Greenville Hail, Wind and Heat: What a Roof Faces
Storm Prediction Center records show how regularly hail finds Greenville. On the evening of May 8, 2024, hail the size of golf balls (1.75 inches) was logged about five miles south of town, and on June 11, 2023 a trained spotter reported one-inch stones in the city itself. The Hunt County storms of April 27, 2026 were worse a few miles away, with hail estimated at 3.5 inches just north of Commerce. Against that record the UL 2218 Class 4 rating earns its place: DECRA and EDCO publish it for stone-coated panels and steel shakes respectively. On standing seam, 24-gauge steel holds its shape better than 26-gauge, though big stones can still mark any metal panel. Ask your insurer how it treats a Class 4 roof; the answer differs from one company to the next.
- Impact-rated standing seam, stone-coated steel and metal shingle options
- Heavier 24-gauge panels that resist cosmetic hail dents better than thinner steel
- Clip spacing and fastening planned for Texas wind uplift
See how Class 4 impact-rated metal roofing works, what to do about hail damage and insurance claims, or compare standing seam systems and stone-coated steel.
Our Metal Roofing Work in Greenville, TX
Three kinds of work fit Greenville. Near downtown, older houses and storefront buildings with low roofs behind parapets call for standing seam: snap lock on pitched slopes, mechanical lock where the pitch drops. Across the ranch-house neighborhoods, owners facing another shingle replacement compare standing seam with EDCO steel shakes. In the HOA communities, DECRA stone-coated steel keeps the look the committee approved. Around Majors Field and out along I-30, shops, barns and commercial buildings take PBR or corrugated panels matched to the purlin spacing.
Standing Seam Roofs
Hidden-clip standing seam in 24-gauge Galvalume, aluminum, copper or zinc, with Kynar 500 finishes built for Texas sun.
Stone-Coated Steel
A textured, low-glare metal roof that blends into established streets and passes most HOA design reviews.
Metal Shingles and Shakes
EDCO and Classic Metal Roofing Systems shingle and shake profiles in colors that suit brick and stone.
Corrugated and PBR Roofs
Exposed-fastener panels that cover big outbuildings for less than standing seam, installed with sealing-washer screws.
Copper and Zinc Roofing
Natural copper and zinc in standing seam, flat lock or diamond panels for whole roofs, bays and turrets.
Metal Roof Repair
Loose fasteners, failed sealant and storm-damaged panels repaired or replaced one section at a time.
How much will it cost? That depends on size, pitch, profile, metal and tear-off, so we measure first. Our cost guide walks through the seven factors.
Approvals Before a Greenville Metal Roof Goes On
Greenville’s roofing guide says permits are required for roofing projects and names shingle replacement as the one exception, so a switch to metal goes through the city’s Building Inspections office and closes with a final inspection. The same guide notes that a complete standing seam system carrying its loads to the structure does not by itself force removal of the old covering; our estimator still checks the deck before advising on tear-off. Older neighborhoods are generally free of HOAs. Newer communities such as Jackson’s Run have them, and an association’s hands are partly tied by Texas Property Code 202.011: it may not bar hail-rated or energy-saving shingles that resemble what it already allows, while color and appearance stay the board’s call. PMRS files the city permit.
Working in Greenville: The Basics
| Counties | Hunt County |
| Residents | Roughly 37,000 |
| Typical home | median value $219,000; half built in 1979 or earlier (Census ACS 2020-2024) |
| From our base | About 46 miles from Mesquite |
| Roof systems | Standing seam, metal shingles and shakes, stone-coated steel, corrugated and PBR, copper and zinc |
| Services | New roofs, replacements, repairs and hail damage documentation |
| Estimate and warranty | Free, measured and itemized in writing; lifetime non-prorated limited warranty on PMRS standing seam, transferable one time |
Built and Installed by One Company, in Greenville Too
- A lifetime non-prorated limited warranty on PMRS standing seam roofs, transferable one time. See our warranties.
- Class 4 impact-rated systems and the product documentation insurers ask for.
- Your deductible stays your deductible. Texas law bars roofers from covering it, and we comply.
- HOA approval packages with product sheets and color samples.
- Metal roofing specialists since 2006, with our own crews on every job.
What Greenville Owners Ask About Metal Roofs
Does Greenville require a permit to switch from shingles to a metal roof?
The city’s roofing guide says permits are required for roofing projects and lists shingle replacement as the exception, so a change to metal goes through Building Inspections. The permit has to be posted where it can be seen from the street, and a final inspection closes it. PMRS files the application as part of the job and confirms the current requirements with the city first.
I own rental houses in Greenville. Does metal pay off on a rental roof?
It can be. Close to half of Greenville’s occupied homes are rentals, and an owner who holds a house for decades pays for every shingle replacement along the way. Standing seam and steel shakes are built to stay on far longer, and a Class 4 product may earn a credit from your carrier. We write a separate itemized estimate for each property so you can compare them.
How does PMRS handle a roof 46 miles from its Mesquite office?
Greenville is a straight run up I-30 from Mesquite, so the distance changes the planning and nothing else. One visit covers the measuring, a look at the deck and color samples. Panels are then formed to your roof’s lengths at our Mesquite base, or on the property with the mobile roll former. The same PMRS crew stays on the job through the city’s final inspection.
How do I pick a metal roof color for a Greenville house?
Our estimator brings painted panel samples and the coater’s charts to the house so you can judge them against your brick and trim in daylight. Lighter and cool-pigment colors reflect more Texas sun, and we can put together a sample kit for an HOA review.
Close to Greenville, Also on Our Schedule
- Caddo Mills (10 mi)
- Royse City (14 mi)
- Quinlan (15 mi)
- Lavon (20 mi)
- Fate (20 mi)
- Rockwall (24 mi)
The full list lives on our DFW service areas page, and the office details are on our Mesquite location page.
Ready for a Permanent Roof in Greenville?
Send the form for a written Greenville estimate, or call (469) 466-2421 and talk it through with the company that forms and installs the roof.
