Dallas County (also Tarrant, Ellis) · Grand Prairie, Texas
Grand Prairie Metal Roofing, North Side to Joe Pool Lake
Between Joe Pool Lake on the south side and the older neighborhoods along I-30 to the north, Grand Prairie needs more than one kind of metal roof. Permanent Metal Roofing Systems roofs homes here with standing seam, stone-coated steel or metal shingles, and covers commercial and shop buildings with PBR and standing seam panels. The city lies mostly in Dallas County, with parts in Tarrant and Ellis, about 21 miles west of our Mesquite office along I-30. Standing seam panels and trim are formed on our own equipment before the crew arrives.
- 20+ years of experience
- Lifetime limited warranty
- Free written estimates
What Grand Prairie Homes Need From a Metal Roof
Northern Grand Prairie is mostly 1950s-70s brick ranches with broad hip roofs, attached carports and porch covers, in older areas such as Dalworth. On homes this age we check the decking and the porch tie-ins at tear-off, and a low porch or carport can move to mechanical lock standing seam, which is rated down to a 1/2:12 slope. The fast-growing south around Joe Pool Lake, including Mira Lagos and Lake Parks, is 1990s-2020s brick-veneer two-storeys with composition shingles. Full sun ages those shingles quickly and hail strips their granules. For them, stone-coated steel or a metal shake keeps the familiar textured look while adding impact resistance and a much longer service life.
We serve Mira Lagos, Westchester, Lake Parks and Dalworth, plus homes and businesses near Joe Pool Lake, Lone Star Park, Epic Waters and the I-20, I-30 and SH-161 corridors.
Grand Prairie Hail, Wind and Heat: What a Roof Faces
The May 28, 2024 derecho damaged fencing and scaffolding at Grand Prairie Stadium and roofs across the city. Grand Prairie straddles the Dallas-Tarrant county line, where spring supercells track most often, so both hail and straight-line wind matter here. For wind, standing seam relies on concealed clips, and clip spacing is tightened at eaves, rakes and corners where uplift is highest. For hail, pick a product with a UL 2218 Class 4 rating and consider 24-gauge steel, which shows fewer cosmetic dents than 26-gauge. Your insurance carrier, not the roofer, decides whether a Class 4 roof earns a premium credit.
- Honest advice on what Class 4 does and does not cover, including cosmetic denting
- Dated storm-damage photos and measurements
- No pressure and no door-to-door storm chasing
See how Class 4 impact-rated metal roofing works, or compare standing seam systems and stone-coated steel.
Our Metal Roofing Work in Grand Prairie, TX
Grand Prairie splits into two kinds of work. In the south, HOA-reviewed two-storeys near Joe Pool Lake call for stone-coated steel or metal shingles with Class 4 ratings. In the older north, simple ranch roofs and low porches suit snap lock and mechanical lock standing seam. Along the I-20, I-30 and SH-161 corridors, commercial and flex buildings use PBR panels or 2-inch mechanical lock, which is designed as a structural roof for metal buildings.
Standing Seam Metal Roofing
Concealed-fastener standing seam in 24-gauge Galvalume, aluminum, copper or zinc, with Kynar 500 finishes built for Texas sun.
Stone-Coated Steel
A textured, low-glare metal roof that blends into established streets and passes most HOA design reviews.
Metal Shingles and Shakes
EDCO and Classic Metal Roofing Systems shingle and shake profiles in colors that suit brick and stone.
Shop, Barn and Porch Panels
Exposed-fastener panels that cover big outbuildings at a lower cost per square foot than standing seam.
Custom Flashing and Chimney Caps
Custom chimney caps, cricket flashing and trim in steel, stainless steel or copper.
Run your Grand Prairie roof through the standing seam cost calculator in about a minute; a free on-site measurement turns it into a firm price.
Grand Prairie HOA Rules and City Permits for Metal
Mira Lagos, Lake Parks and most subdivisions in south Grand Prairie have mandatory HOAs with exterior guidelines, so plan on architectural review before any roof change. Under Texas Property Code 202.011, an HOA generally cannot prohibit impact-resistant or energy-efficient roofing that resembles approved materials, but it may still set rules on color and appearance. If you are unsure whether deed restrictions apply to your lot, check before choosing a product. Either way, we pull the city permit where required.
Working in Grand Prairie: The Basics
| Counties | Dallas County (also Tarrant, Ellis) |
| ZIP codes we cover | 75050, 75051, 75052, 75053, 75054 |
| Residents | Roughly 210,000 |
| From our office | About 21 miles from 3100 Manchester Dr in Mesquite |
| Roof systems | Standing seam, stone-coated steel, metal shingles and shakes, corrugated and PBR panels, custom flashing, chimney caps and metal gutters |
| Estimate and warranty | Free and itemized in writing; lifetime non-prorated limited warranty on PMRS standing seam |
The PMRS Difference in Grand Prairie
- Our own installation crews, managed from our Mesquite office.
- A lifetime non-prorated limited warranty on PMRS standing seam roofs. See our warranties.
- Class 4 impact-rated systems and the product documentation insurers ask for.
- Your deductible stays your deductible. Texas law bars roofers from covering it, and we comply.
- HOA submittal packages with spec sheets and color samples.
Metal Roofing in Grand Prairie: Common Questions
What does a metal roof cost in Grand Prairie?
It depends on roof size, pitch, the system you choose and how many layers come off. Our metal roof cost page publishes current per-square-foot prices for 24-gauge Kynar standing seam and has a calculator, so you can see a range before we visit. A free on-site measurement then turns that range into a written quote for your roof.
Can a low carport or porch roof in north Grand Prairie take metal?
Yes. Mechanical lock standing seam is rated down to a 1/2:12 slope when it is seamed over a solid deck with high-temperature underlayment, which covers most carports and porch covers too flat for shingles. Snap lock needs at least 3/12, so we measure the pitch first and pick the panel to match, often in the same color as the main roof.
Should I call my insurer before replacing a storm-damaged Grand Prairie roof?
Yes. If wind or hail caused the damage, contact your carrier and let the adjuster inspect before any tear-off. We can document the existing roof with photos and measurements for the claim. Never sign an insurance check over to a contractor, never pay in full up front, and get the scope of work in writing before the job starts.
Do you offer free metal roofing estimates in Grand Prairie?
Yes, and they come in writing. A PMRS estimator measures the roof, looks at the decking and flashing, lays out panel and color choices, and itemizes the price. From our Mesquite office, Grand Prairie is roughly 21 miles away.
Close to Grand Prairie, Also on Our Schedule
- Irving (5 mi)
- Arlington (8 mi)
- Duncanville (8 mi)
- Cedar Hill (11 mi)
- Dallas (12 mi)
- Highland Park (13 mi)
The full list lives on our DFW service areas page, and the office details are on our Mesquite location page.
Price a Metal Roof for Your Grand Prairie Property
Send the form for a written Grand Prairie estimate, or call (469) 466-2421 and talk metal roofing with the people who fabricate it.