Dallas County · Highland Park, Texas
Highland Park Metal Roofing in Copper, Zinc and Mechanical Lock
Along Turtle Creek and Lakeside Drive, Highland Park’s estate homes already wear slate, clay tile and standing seam, so a new roof has to meet a high standard. Permanent Metal Roofing Systems forms mechanical lock standing seam in copper, zinc, aluminum and steel, and installs metal slate and shake profiles, flat-lock and diamond panels for turrets and bays, custom box gutters and copper chimney caps. Highland Park is a small Dallas County town, bordered by Dallas and University Park, about 9 miles from our Mesquite office.
- 20+ years of experience
- Lifetime limited warranty
- Free written estimates
What Highland Park Homes Need From a Metal Roof
Highland Park is one of Texas’s wealthiest enclaves, and its housing runs from 1910s-40s estate homes on Beverly Drive to modern luxury rebuilds. Owners here have long favored slate, clay tile and standing seam metal over composition shingle. The older estates carry steep slopes, dormers, turrets and built-in gutters, and on slate and tile roofs of that age the flashings, valleys and gutters often fail before the roof field does. Copper or zinc mechanical lock panels, double-locked at 180 degrees, suit low-slope porches and bays. Flat-lock and diamond panels wrap turrets and curved forms. Where a slate look matters, aluminum metal slate keeps the pattern at much lower weight.
We serve the Beverly Drive estates, the Highland Park Village area, Turtle Creek and Lakeside Drive, including homes near Lakeside Park and the Dallas Country Club.
Highland Park Hail, Wind and Heat: What a Roof Faces
Highland Park was within the June 13, 2012 baseball-size hail swath that damaged roofs across the Park Cities and North Dallas. Hail that size can crack slate and tile and mark soft metals, so material and thickness matter. Heavier 20-oz copper and .8 mm zinc are less prone to marking than lighter weights, and metal slate and shake products are available with manufacturer UL 2218 Class 4 ratings. Any insurance credit for a Class 4 roof is set by each carrier. Concealed clips, placed closer together at edges and ridges, handle wind uplift without a single exposed fastener.
- Honest advice on what Class 4 does and does not cover, including cosmetic denting
- Dated storm-damage photos and measurements
- No pressure and no door-to-door storm chasing
See how Class 4 impact-rated metal roofing works, or compare standing seam systems and stone-coated steel.
Our Metal Roofing Work in Highland Park, TX
In Highland Park the premium systems lead. Mechanical lock standing seam in copper or Rheinzink zinc suits estates and modern rebuilds alike. Flat-lock and diamond-shape panels clad turrets, bays and mansards. Metal slate and shake profiles fit homes that need a traditional texture. Custom box gutters, copper chimney caps and flashing, all bent on our own computerized equipment, carry the same material through every detail.
Standing Seam Metal Roofing
Concealed-fastener standing seam in 24-gauge Galvalume, aluminum, copper or zinc, with Kynar 500 finishes built for Texas sun.
Stone-Coated Steel
A textured, low-glare metal roof that blends into established streets and passes most HOA design reviews.
Metal Shingles and Shakes
EDCO and Classic Metal Roofing Systems shingle and shake profiles in colors that suit brick and stone.
Shop, Barn and Porch Panels
Exposed-fastener panels that cover big outbuildings at a lower cost per square foot than standing seam.
Custom Flashing and Chimney Caps
Custom chimney caps, cricket flashing and trim in steel, stainless steel or copper.
Run your Highland Park roof through the standing seam cost calculator in about a minute; a free on-site measurement turns it into a firm price.
Highland Park HOA Rules and City Permits for Metal
Highland Park has no HOAs. Instead, the town enforces its own detailed building codes and architectural standards, and those govern roof materials and appearance. Texas Property Code 202.011, which generally keeps HOAs from banning impact-resistant or energy-efficient roofing that resembles approved materials, therefore matters less here than the town’s own review. We prepare material samples and drawings for that review, and we pull the town permit where required.
Working in Highland Park: The Basics
| Counties | Dallas County |
| ZIP codes we cover | 75205, 75219 |
| Residents | Roughly 8,800 |
| From our office | About 9 miles from 3100 Manchester Dr in Mesquite |
| Roof systems | Standing seam, stone-coated steel, metal shingles and shakes, corrugated and PBR panels, custom flashing, chimney caps and metal gutters |
| Estimate and warranty | Free and itemized in writing; lifetime non-prorated limited warranty on PMRS standing seam |
Built and Installed by One Company, in Highland Park Too
- HOA submittal packages with spec sheets and color samples.
- Spec sheets, shop drawings and submittals for builders and architects.
- Panels, trim and flashing fabricated in-house, so every piece matches and fits.
- Written, itemized estimates that spell out panel, gauge, finish, underlayment and trim.
- Our own installation crews, managed from our Mesquite office.
Metal Roofing in Highland Park: Common Questions
Can a Highland Park home use copper only as an accent?
Yes, and that is a classic way to use it. We can roof dormers, an entry porch, a bay or a turret in 16-oz copper mechanical lock or flat-lock panels while the main roof stays slate, tile or steel standing seam. Copper starts bright and weathers through brown over the years. We separate copper from dissimilar metals to prevent galvanic corrosion.
How does Highland Park’s architectural review affect a metal roof?
Highland Park sets its own building codes and architectural standards rather than relying on HOAs. Before we order material, we confirm what the town requires for your property, prepare product data, samples and drawings, and pull the permit. Panels are formed after approval, so the profile and color you submit are exactly what goes on the roof.
What metal options suit a Highland Park slate roof?
Two routes work. Aluminum metal slate, such as Classic Metal Roofing Systems Slate Rock Oxford, reproduces a slate pattern at far less weight. Or keep a sound slate field and use copper or zinc for the valleys, flashings and low-slope sections, where older slate roofs commonly leak. We can walk the roof with you and price both approaches.
Do you offer free metal roofing estimates in Highland Park?
Yes, and they come in writing. A PMRS estimator measures the roof, looks at the decking and flashing, lays out panel and color choices, and itemizes the price. From our Mesquite office, Highland Park is roughly 9 miles away.
Close to Highland Park, Also on Our Schedule
- University Park (1 mi)
- Dallas (4 mi)
- Farmers Branch (9 mi)
- Irving (9 mi)
- Richardson (9 mi)
- Addison (9 mi)
The full list lives on our DFW service areas page, and the office details are on our Mesquite location page.
Price a Metal Roof for Your Highland Park Property
Send the form for a written Highland Park estimate, or call (469) 466-2421 and talk metal roofing with the people who fabricate it.