Metal roofing installers serving Keller, Texas
Keller Metal Roofing, From Hip-and-Valley Homes to Horse Barns
In Keller the roof is typically big, the lot is often generous, and an architectural committee usually wants a say. Permanent Metal Roofing Systems plans for all three. On houses we install metal shakes and shingles, DECRA stone-coated steel and standing seam; on barns, arenas and shops we run corrugated or PBR panels, and all flashing is bent in our own shop. Keller lies about 42 miles from our Mesquite office, so we book Keller estimates ahead and arrive with samples, color charts and product data for the first conversation. The estimate itself is free and itemized, built from measurements taken on your roof rather than from an aerial guess.
- 20+ years of experience
- Lifetime limited warranty
- Free written estimates
The Houses of Keller and the Metal Roofs That Suit Them
Keller is a 1990s and 2000s city. Census estimates put the median home at 1999; more than half of all houses were built between 1990 and 2009, and fewer than 4 percent predate 1970. In practice that means large two-storey brick-veneer homes with demanding roofs: several hips, deep valleys, dormers and long lines of roof-to-wall flashing, many still under their first or second composition roof. Along the Keller-Smithfield Road corridor, estate and acreage properties add detached garages, barns and shops to the job list. The town itself is much older than its houses. The Texas and Pacific Railway platted it in 1881 as Athol, it was renamed within a year for railroad foreman John C. Keller, and it incorporated in 1955.
We serve Keller homes in Bear Creek, Marshall Ridge, Hidden Lakes and the blocks around Old Town, near Keller Town Center, and on the estate lots along Keller-Smithfield Road, US-377 and Keller Parkway.
Why Keller Roofs Take a Beating
Keller’s hail record is specific. On the evening of April 28, 2021, a National Weather Service employee measured tennis-ball hail, 2.5 inches across, just west-southwest of town, and 2.25-inch stones were reported near US-377 and Mount Gilead Road; readers sent NBC DFW photos of a measured 2.4-inch stone and a broken windshield. More recently, on September 21, 2026, storm winds brought down power lines on Keller-Smithfield Road near Village Trail. Big, steep Keller roofs have back slopes nobody sees from the yard, so both impact resistance and attachment deserve attention. EDCO rates its ArrowLine steel shake UL 2218 Class 4, DECRA’s stone-coated profiles carry Class 4 ratings that DECRA itself publishes, and 24-gauge standing seam, being heavier steel than 26-gauge, dents less.
- Honest advice on what Class 4 does and does not cover, including cosmetic denting
- Dated storm-damage photos and measurements
- No pressure and no door-to-door storm chasing
See how Class 4 impact-rated metal roofing works, what to do about hail damage and insurance claims, or compare standing seam systems and stone-coated steel.
Roof Systems for Keller Homes and Buildings
Big hip-and-valley roofs are where metal shingles and shakes earn their keep. Their interlocking pieces turn into valleys and around dormers without the long tapered panels standing seam needs, and from the street they read as premium shake or slate. DECRA stone-coated steel is the other common Keller choice, especially where an HOA wants a granular texture. Standing seam fits modern farmhouse builds and simpler rooflines, and copper on a bay or entry roof makes a natural accent on an estate home. For barns, shops and arenas on acreage, corrugated or PBR panels cover long spans economically, and we pick a color offered in both profiles so outbuildings match the house.
Standing Seam Roofs
A clean, modern roof with no exposed screws to back out, available with Class 4 impact-rated assemblies.
Stone-Coated Steel
Steel panels coated in stone granules for the look of shake, shingle or tile, with impact ratings from the manufacturer.
Metal Shingles and Shakes
Interlocking metal shingles that shed hail and wind and keep a cedar, slate or tile appearance.
Corrugated and PBR Roofs
Corrugated and PBR panels for homes, shops, barns, carports and porches around Keller.
Copper and Zinc Roofing
Standing seam, flat lock and diamond patterns in metals that age instead of fading.
Metal Roof Repair
Repairs for standing seam, PBR, corrugated and metal shingle roofs, with the cause written down.
A free measurement turns a Keller roof into an itemized written estimate. Before that, the metal roof cost guide shows what drives the total.
What a High-Value Keller Home Needs From Its Roof
Keller’s large-lot SF-36 district is where a horse barn, a shop and a pool house most often share a property with the main house, and the city’s development code treats each one differently. Exposed metal walls are allowed only on barns and agricultural structures in SF-36. Any other accessory building has to be brick, stone or the same material as the house, and wood shingles are barred on accessory buildings entirely. That makes the roof the natural thread across the property: a brick pool house can carry the same metal shake or standing seam as the main roof, while the working barn takes PBR in the matching color. And because masonry has to cover at least 80 percent of the main house’s walls, a roof color that flatters its brick will usually flatter every building on the lot.
- Pool house and detached garage carrying the main roof’s metal above walls of brick or stone
- Working barns in SF-36 roofed in PBR or corrugated panels, color-matched to the house
- Metal shake or stone-coated steel on accessory buildings, where wood shingles are not permitted
- Carport roofs matched to the house in design and material, as Keller’s code requires
Compare copper and zinc roofing, architectural standing seam and the warranties that come with each system.
Getting a Metal Roof Approved in Keller
Nearly every Keller subdivision built since 1990 runs an architectural review of roofing and exterior materials, so plan on approval before anything is ordered. Committees typically ask for the product name, profile, color and impact rating, and we assemble that package with manufacturer literature. State law limits how far that review reaches. Property Code 202.011 protects owners who pick wind-, hail- or energy-rated shingles, provided the new roof mimics what the community already allows, equals or exceeds it in quality and does not clash with neighboring houses; steel shakes and stone-coated steel imitate conventional roofing, so they usually make for an easier application. On the city side, Keller’s building FAQ lists home roof repairs that do not involve decking as permit-free, and we confirm any full replacement with Building Services before work begins.
Working in Keller: The Basics
| Counties | Tarrant County |
| Residents | Roughly 46,000 |
| Typical home | median value $594,000; half built in 1999 or earlier (Census ACS 2020-2024) |
| From our base | About 42 miles from Mesquite |
| Roof systems | Standing seam, metal shingles and shakes, stone-coated steel, corrugated and PBR, copper and zinc |
| Services | New roofs, replacements, repairs and hail damage documentation |
| Estimate and warranty | Free, measured and itemized in writing; lifetime non-prorated limited warranty on PMRS standing seam, transferable one time |
Built and Installed by One Company, in Keller Too
- Class 4 impact-rated systems and the product documentation insurers ask for.
- Your deductible stays your deductible. Texas law bars roofers from covering it, and we comply.
- HOA approval packages with product sheets and color samples.
- Metal roofing specialists since 2006, with our own crews on every job.
- Panels and trim formed by PMRS in Mesquite or on site, so every piece fits the roof it was made for.
Keller Metal Roof Questions
Our Keller house has a dozen hips and valleys. Does that make metal harder to install?
It adds labor and trim, not risk. Every valley gets formed valley metal, every dormer and sidewall gets step or counter flashing, and on standing seam each hip needs tapered panels cut on site. That is why we measure in person and break the estimate out by roof area, trim and flashing. On very cut-up roofs, metal shakes or stone-coated steel usually need fewer custom cuts than standing seam, which can shorten the job.
Can the barn or shop on our Keller acreage match the house?
Yes. A working barn or shop usually gets exposed-fastener corrugated or PBR panels, which span purlins and go up quickly, while a guest house or show barn can take standing seam. We choose a color available in both profiles so the outbuilding matches the main roof. Our mobile roll former can run panels to length at your property, which keeps a long barn roof free of end laps.
Our Keller home was built around 2000. Is the original roof really due?
Quite possibly. Shingles marketed with a 30-year life tend to give 15 to 20 years once Texas sun and hail go to work on them, and more than half of Keller’s houses date from 1990 to 2009. Watch for curling or bare shingles facing south and west, split rubber boots around plumbing vents, and granules collecting in the yard after storms. We can measure and give you a written estimate now, so you can plan the change instead of reacting to a leak.
What metal roof suits a modern farmhouse build on Keller acreage?
Usually standing seam: snap lock panels with seams of 1.5 or 1.75 inches in black, charcoal or dark bronze over the main roof, often with a porch roof in the same panel. Farmhouse designs tend to have simpler gables than Keller’s 1990s hip-and-valley homes, so long, full-length panels look clean and go on efficiently. Copper over a bay or entry adds warmth against painted brick, and a barn on the same lot can take PBR in the house color.
How long does a metal roof installation take in Keller?
Most homes take a few working days once the panels are formed, depending on size, pitch, tear-off and weather. Your estimate includes a time frame, and our office keeps you posted on the schedule.
Neighboring Communities on Our Route
- North Richland Hills (5 mi)
- Westlake (5 mi)
- Southlake (5 mi)
- Colleyville (6 mi)
- Trophy Club (6 mi)
- Grapevine (9 mi)
The full list lives on our DFW service areas page, and the office details are on our Mesquite location page.
Price a Metal Roof for Your Keller Property
A Keller estimate costs nothing and comes itemized, with straight answers on panel profile, color and timing.